Saturday, October 16, 2010
Sta-Lok rod systems
9:10 AM | เขียนโดย
East Marine |
Edit Post
Order Sta-Lok Rod Systems
Sta-Lok rod systems offer the ultimate in rigging design. In application the Sta-Lok rod system is highly effective for architectural rigging, providing a high quality, low maintenance alternative to wire rigging systems. Manufactured from the highest specification materials. Sta-Lok offer a comprehensive range of stainless steel rods and fittings. The Sta-Lok system can be tailored to suit strength and dimensional requirements on almost any project.
Standard Capacity. Benefiting from many years’ experience Sta-Lok have developed a Standard Capacity Range of products to meet most strength requirements. This range is manufactured from 316 stainless steel grade 1.4401. Fork and Eye ends are available in two finish specifications, satin and polished.
High Capacity. Understanding the needs for high strength rod systems, Sta-Lok have developed a high capacity range of products. Manufactured from high tensile stainless steel alloy, the high capacity range is designed and tailored to meet client’s individual requirements. Made to order.
Stainless Steel Rods
Standard Capacity. Manufactured from 316 stainless steel grade 1.4401 are available in diameters to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1".
Minimum breaking loads for 316 stainless steel rods are based on the core diameter of the thread. Stainless steel rods are available up to three metres in length. For spans greater than three metres, a rod connector reference RC is required.
Sta-Lok Tension Forks
Standard Capacity. Are available with left and right hand ISO metric and UNF threads. Used in conjunction with each other they provide the most symmetrical design and most economical method of tensioning rod-rigging systems. Standard capacity tension forks are available in sizes to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1". Larger sizes are available made to order.
Sta-Lok tension forks can also be used with independent stud terminals for use with wire ropes. See page 14 for further details.
Sta-Lok Fixed Forks
Standard Capacity. Available with right hand ISO metric and UNF threads. Designed for fixed length spans, or where adjustment is provided by a turnbuckle. Sizes to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1".
Sta-Lok Rod Connectors
Standard Capacity. Are required for rod spans greater than three metres in length. Designed to develop the full load of the rods, the rod connector is threaded left hand one end, right hand the other end to ensure that the rod assembly remains secure during tensioning. Sizes to suit ISO metric M6 – M27 and UNF threads 14" – 1".
More info and Any items not show please visit to Rigging Shop-East Marine
Sta-Lok rod systems offer the ultimate in rigging design. In application the Sta-Lok rod system is highly effective for architectural rigging, providing a high quality, low maintenance alternative to wire rigging systems. Manufactured from the highest specification materials. Sta-Lok offer a comprehensive range of stainless steel rods and fittings. The Sta-Lok system can be tailored to suit strength and dimensional requirements on almost any project.
Standard Capacity. Benefiting from many years’ experience Sta-Lok have developed a Standard Capacity Range of products to meet most strength requirements. This range is manufactured from 316 stainless steel grade 1.4401. Fork and Eye ends are available in two finish specifications, satin and polished.
High Capacity. Understanding the needs for high strength rod systems, Sta-Lok have developed a high capacity range of products. Manufactured from high tensile stainless steel alloy, the high capacity range is designed and tailored to meet client’s individual requirements. Made to order.
Stainless Steel Rods
Standard Capacity. Manufactured from 316 stainless steel grade 1.4401 are available in diameters to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1".
Minimum breaking loads for 316 stainless steel rods are based on the core diameter of the thread. Stainless steel rods are available up to three metres in length. For spans greater than three metres, a rod connector reference RC is required.
Sta-Lok Tension Forks
Standard Capacity. Are available with left and right hand ISO metric and UNF threads. Used in conjunction with each other they provide the most symmetrical design and most economical method of tensioning rod-rigging systems. Standard capacity tension forks are available in sizes to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1". Larger sizes are available made to order.
Sta-Lok tension forks can also be used with independent stud terminals for use with wire ropes. See page 14 for further details.
Sta-Lok Fixed Forks
Standard Capacity. Available with right hand ISO metric and UNF threads. Designed for fixed length spans, or where adjustment is provided by a turnbuckle. Sizes to suit ISO metric threads M6 – M27 and UNF threads 1⁄4" – 1".
Sta-Lok Rod Connectors
Standard Capacity. Are required for rod spans greater than three metres in length. Designed to develop the full load of the rods, the rod connector is threaded left hand one end, right hand the other end to ensure that the rod assembly remains secure during tensioning. Sizes to suit ISO metric M6 – M27 and UNF threads 14" – 1".
More info and Any items not show please visit to Rigging Shop-East Marine
Subscribe to:
Post Comments (Atom)
About Me
- East Marine
- East Marine Rigging Services has been actively involved in architectural rigging in Phuket since 2001 : balustrading, swimming pools, stairways, railings, shade cloths and more.
0 ความคิดเห็น:
Post a Comment